# text: "Your files are all up to date. No checkouts were required."
DITL_131_General.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=236 y1=72 x2=296 y2=92
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=8 x2=300 y2=60
# text: "“^0” was not found. Some commands will therefore be unavailable."
DITL_132_General.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=216 y1=72 x2=296 y2=92
# text: "Oh Really"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=8 x2=300 y2=60
# text: "There’s a 15-character limit on project names (not including the whole path name)."
DITL_133_General.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=88 x2=312 y2=108
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=8 x2=320 y2=76
# text: "The file “Source Manager Prefs” was created by a newer version of Source Manager, so it can’t be used. Internal defaults will be used instead."
DITL_134_General.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=112 x2=316 y2=132
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=8 x2=328 y2=96
# text: "The file “^0” is a project file. Use the “^1” command for renaming project files, so that the database file will also get renamed."
DITL_150_Confirm Revert.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=208 y1=60 x2=290 y2=80
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=105 y1=60 x2=187 y2=80
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=113 y1=5 x2=293 y2=45
# text: "Revert to the last version saved ?"
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=47 x2=66 y2=64
# text: "Caution"
DITL_151_Save Changes.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=35 y1=74 x2=117 y2=94
# text: "Yes"
# item 1: BUTTON (0x04) enabled
# bounds: x1=35 y1=111 x2=117 y2=131
# text: "No"
# item 2: BUTTON (0x04) enabled
# bounds: x1=205 y1=111 x2=287 y2=131
# text: "Cancel"
# item 3: TEXT (0x88) disabled
# bounds: x1=25 y1=14 x2=291 y2=55
# text: "Save changes to “^0” before ^1?"
DITL_152_Confirm Revert.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=260 y1=92 x2=326 y2=112
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=8 x2=328 y2=60
# text: "There is not enough Source Manager memory to finish the current operation. Closing table windows would help."
# item 2: TEXT (0x88) disabled
# bounds: x1=60 y1=64 x2=308 y2=80
# text: "(need at least ^0K bytes more)"
# item 3: BUTTON (0x04) enabled
# bounds: x1=152 y1=92 x2=240 y2=112
# text: "Exit To Shell"
DITL_153_Save Changes.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=215 y1=74 x2=297 y2=94
# text: "Remove"
# item 1: BUTTON (0x04) enabled
# bounds: x1=23 y1=75 x2=105 y2=95
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=117 y1=75 x2=199 y2=95
# text: "Destroy"
# item 3: TEXT (0x88) disabled
# bounds: x1=61 y1=6 x2=303 y2=59
# text: "Choose how to proceed. “Remove” is prudent, “Destroy” destroys the project data forever. "
DITL_154_Confirm Revert.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=188 y1=64 x2=250 y2=84
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=168 y2=28
# text: "Out of memory."
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=28 x2=172 y2=56
# text: "(Please allocate more memory and try again)"
DITL_155_Confirm Revert.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=212 y1=84 x2=294 y2=104
# text: "Check Out"
# item 1: BUTTON (0x04) enabled
# bounds: x1=96 y1=84 x2=176 y2=104
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=296 y2=72
# text: "Your modified Read-only file “^0” will be over-written. Check out anyway?"
DITL_156_Confirm Revert.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=248 y1=76 x2=330 y2=96
# text: "Check In"
# item 1: BUTTON (0x04) enabled
# bounds: x1=36 y1=76 x2=116 y2=96
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=296 y2=60
# text: "The file “^0” has an empty comment field. Check in anyway?"
# item 3: BUTTON (0x04) enabled
# bounds: x1=132 y1=76 x2=228 y2=96
# text: "Edit Comment"
DITL_157_Confirm Revert.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=235 y1=84 x2=317 y2=104
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=132 y1=84 x2=214 y2=104
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=320 y2=72
# text: "Are you sure you want to delete all revisions of “^0” from the database? (This is not Undo-able)"
DITL_158_Confirm Revert.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=180 y1=60 x2=270 y2=80
# text: "None"
# item 1: BUTTON (0x04) enabled
# bounds: x1=88 y1=60 x2=166 y2=80
# text: "Individual"
# item 2: BUTTON (0x04) enabled
# bounds: x1=20 y1=60 x2=78 y2=80
# text: "Global"
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=232 y2=44
# text: "Enter CheckIn comments for orphans?"
DITL_159_Confirm Revert.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=235 y1=84 x2=317 y2=104
# text: "Delete"
# item 1: BUTTON (0x04) enabled
# bounds: x1=132 y1=84 x2=214 y2=104
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=320 y2=72
# text: "Are you sure you want to delete the symbolic name “^0” from the database? (This is not Undo-able)"
DITL_160_Confirm Revert.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=235 y1=60 x2=317 y2=80
# text: "Auto-Find"
# item 1: BUTTON (0x04) enabled
# bounds: x1=36 y1=60 x2=116 y2=80
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=64 y1=9 x2=320 y2=41
# text: "Please locate “^0”."
# item 3: BUTTON (0x04) enabled
# bounds: x1=128 y1=60 x2=218 y2=80
# text: "Manual-Find"
DITL_161_Confirm Revert.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=232 y1=120 x2=298 y2=140
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=304 y2=108
# text: "The project is now created.\n\nTo establish a checkout dir for this new project, select one from the menu and then choose “Remember” from the CheckOut Dirs menu."
DITL_162_Confirm Revert.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=235 y1=80 x2=317 y2=100
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=320 y2=60
# text: "To “SS REMOVE” a SourceSafe project, hold down the option key and choose the project from the “Projects” menu."
DITL_200_Severe Error.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=264 y1=104 x2=324 y2=124
# text: "Proceed"
# item 1: BUTTON (0x04) enabled
# bounds: x1=168 y1=104 x2=228 y2=124
# text: "Quit"
# item 2: TEXT (0x88) disabled
# bounds: x1=80 y1=16 x2=332 y2=87
# text: "^0\n\nResult Code = ^1"
DITL_250_No Printer.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=262 y1=85 x2=327 y2=105
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=84 y1=14 x2=327 y2=67
# text: "Printing operations are not possible until you have selected a Printer using the Chooser. "
DITL_251_error1.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=257 y1=138 x2=315 y2=158
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=79 y1=15 x2=323 y2=100
# text: "Couldn\'t complete the last command because ^0."
# item 2: TEXT (0x88) disabled
# bounds: x1=81 y1=105 x2=325 y2=123
# text: "Result Code = ^1"
DITL_252_error2.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=257 y1=138 x2=315 y2=158
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=79 y1=15 x2=323 y2=100
# text: "Couldn\'t successfully startup or quit the application because ^0."
# item 2: TEXT (0x88) disabled
# bounds: x1=81 y1=105 x2=325 y2=123
# text: "Result Code = ^1"
DITL_253_assert.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=282 y1=142 x2=340 y2=162
# text: "Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=201 y1=142 x2=259 y2=162
# text: "Fail"
# item 2: BUTTON (0x04) enabled
# bounds: x1=114 y1=142 x2=183 y2=162
# text: "Continue"
# item 3: TEXT (0x88) disabled
# bounds: x1=57 y1=5 x2=347 y2=86
# text: "Assertion failed:\n^0"
# item 4: TEXT (0x88) disabled
# bounds: x1=60 y1=92 x2=302 y2=127
# text: "File: ^1\nLine: ^2"
DITL_300_OS Error.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=264 y1=104 x2=324 y2=124
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=16 x2=332 y2=87
# text: "^0\n\nResult Code = ^1"
DITL_402_Warning.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=217 y1=98 x2=277 y2=118
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=64 y1=8 x2=284 y2=86
# text: "^0^1^2^3"
DITL_460_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=52 x2=268 y2=72
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=120 y1=52 x2=184 y2=72
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=280 y2=28
# text: "Move selected files to the trash?"
DITL_461.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=135 x2=332 y2=155
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=332 y2=124
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=159
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 9: TEXT (0x88) disabled
# bounds: x1=12 y1=164 x2=226 y2=196
# text: "Choose the file to transfer ^0’s ckid to."
DITL_462_Pick Sample Rate.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=236 y1=80 x2=306 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=160 y1=80 x2=224 y2=100
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=80 y1=57 x2=121 y2=72
# text: "TEXT"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=80 y1=81 x2=121 y2=96
# text: "****"
# item 4: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=329 y2=41
# text: "Enter a Type and Creator. You may specify “any” by entering “****”."
# item 5: TEXT (0x88) disabled
# bounds: x1=36 y1=56 x2=74 y2=73
# text: "Type:"
# item 6: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
# item 7: TEXT (0x88) disabled
# bounds: x1=16 y1=80 x2=74 y2=97
# text: "Creator:"
DITL_463_Pick Sample Rate.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=196 y1=80 x2=266 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=120 y1=80 x2=184 y2=100
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=82 x2=105 y2=97
# text: "TEXT"
# item 3: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=233 y2=41
# text: "Enter an extesion, such as “.c”, “.cp”, etc."
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=60 x2=87 y2=77
# text: "Extension:"
# item 5: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
DITL_464_Pick Sample Rate.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=108 x2=354 y2=128
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=208 y1=108 x2=272 y2=128
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=74 x2=352 y2=89
# text: "TEXT"
# item 3: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=265 y2=45
# text: "Enter a new name for the file “^0”:"
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=52 x2=95 y2=69
# text: "New name:"
# item 5: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
DITL_465.txt
# 17 entries
# item 0: EDIT_TEXT (0x10) enabled
# bounds: x1=12 y1=180 x2=232 y2=228
# text: ""
# item 1: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=236 x2=24 y2=252
# text: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=25 y1=238 x2=65 y2=250
# text: "Locked"
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=163 x2=70 y2=175
# text: "Comments:"
# item 4: TEXT (0x88) disabled
# bounds: x1=22 y1=116 x2=71 y2=128
# text: "Created:"
# item 5: TEXT (0x88) disabled
# bounds: x1=18 y1=128 x2=71 y2=140
# text: "Modified:"
# item 6: TEXT (0x08) enabled
# bounds: x1=23 y1=140 x2=71 y2=152
# text: "Version:"
# item 7: TEXT (0x08) enabled
# bounds: x1=31 y1=80 x2=70 y2=92
# text: "Where:"
# item 8: TEXT (0x08) enabled
# bounds: x1=41 y1=44 x2=70 y2=56
# text: "Kind:"
# item 9: TEXT (0x08) enabled
# bounds: x1=41 y1=56 x2=70 y2=68
# text: "Size:"
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=28 y1=6 x2=64 y2=42
# text: ""
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=76 y1=44 x2=236 y2=56
# text: ""
# item 12: EDIT_TEXT (0x10) enabled
# bounds: x1=76 y1=56 x2=236 y2=68
# text: ""
# item 13: EDIT_TEXT (0x10) enabled
# bounds: x1=76 y1=84 x2=236 y2=112
# text: ""
# item 14: EDIT_TEXT (0x10) enabled
# bounds: x1=76 y1=116 x2=236 y2=128
# text: ""
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=76 y1=128 x2=236 y2=140
# text: ""
# item 16: EDIT_TEXT (0x10) enabled
# bounds: x1=76 y1=141 x2=236 y2=153
# text: ""
DITL_466_Pick Sample Rate.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=280 y1=90 x2=350 y2=110
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=200 y1=90 x2=264 y2=110
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=88 y1=93 x2=181 y2=107
# text: "*.*"
# item 3: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=320 y2=52
# text: "Which files in “^0” should be entered into the project database? "
# item 4: TEXT (0x88) disabled
# bounds: x1=12 y1=88 x2=80 y2=116
# text: "Filename or file specifier:"
# item 5: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
# item 6: TEXT (0x88) disabled
# bounds: x1=12 y1=64 x2=204 y2=80
# text: "(e.g. “All files” is specified as “*.*”)"
DITL_467.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=135 x2=332 y2=155
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=332 y2=124
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=159
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 9: TEXT (0x88) disabled
# bounds: x1=12 y1=164 x2=230 y2=184
# text: "Please Locate SourceServer"
DITL_468.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=135 x2=332 y2=155
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=332 y2=124
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=159
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 9: TEXT (0x88) disabled
# bounds: x1=12 y1=164 x2=230 y2=184
# text: "Please Locate ToolServer"
DITL_469_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=188 y1=84 x2=288 y2=104
# text: "BBEdit Merge"
# item 1: BUTTON (0x04) enabled
# bounds: x1=8 y1=84 x2=72 y2=104
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=288 y2=76
# text: "There is a later revision of “^0” in the database. Merge is required to check in."
# item 4: BUTTON (0x84) disabled
# bounds: x1=84 y1=84 x2=172 y2=104
# text: "MPW Merge"
DITL_470.txt
# 7 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=268 y2=24
# text: "MainText"
# item 1: CUSTOM (0x00) enabled
# bounds: x1=8 y1=56 x2=196 y2=67
# data: ""
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 140
# item 3: BUTTON (0x04) enabled
# bounds: x1=208 y1=53 x2=272 y2=73
# text: "Cancel#3037"
# item 4: TEXT (0x08) enabled
# bounds: x1=52 y1=24 x2=196 y2=50
# text: "SubText line 1\nline 2"
# item 5: TEXT (0x08) enabled
# bounds: x1=8 y1=72 x2=91 y2=85
# text: "SubText2"
# item 6: TEXT (0x08) enabled
# bounds: x1=107 y1=72 x2=142 y2=85
# text: "SubText3"
DITL_471_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=260 y1=84 x2=324 y2=104
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=176 y1=84 x2=240 y2=104
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=324 y2=68
# text: "Checked in “^0”. Would you like to move “^1” to the trash?"
DITL_472_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=136 y1=76 x2=200 y2=96
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=52 y1=76 x2=116 y2=96
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=212 y2=28
# text: "Remove selected files?"
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=36 x2=196 y2=68
# text: "(Note: you can use the option key to suppress this dialog)"
DITL_473_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=216 y1=100 x2=280 y2=120
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=132 y1=100 x2=196 y2=120
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=5 x2=292 y2=89
# text: "There is more than one file selected. The Comment and Task data you enter will be applied to all selected files, overwriting whatever was there before. "
DITL_474_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=116 y1=68 x2=180 y2=88
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16411 y1=67 x2=16475 y2=87
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=184 y2=28
# text: "Files are Read-Only"
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=29 x2=168 y2=57
# text: "(Comments of Read-Only files cannot be edited)"
DITL_476_FD Status.txt
# 7 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=56 y1=13 x2=196 y2=29
# text: "Process This Folder?"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=16440 y1=72 x2=16516 y2=88
# data: ""
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: BUTTON (0x04) enabled
# bounds: x1=212 y1=88 x2=280 y2=108
# text: "Process#100"
# item 4: TEXT (0x88) disabled
# bounds: x1=56 y1=36 x2=284 y2=72
# text: ""
# item 5: BUTTON (0x04) enabled
# bounds: x1=128 y1=88 x2=192 y2=108
# text: "Skip#3051"
# item 6: BUTTON (0x04) enabled
# bounds: x1=48 y1=88 x2=112 y2=108
# text: "Cancel#101"
DITL_477_Pick Sample Rate.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=108 x2=354 y2=128
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=208 y1=108 x2=272 y2=128
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=74 x2=352 y2=89
# text: "TEXT"
# item 3: TEXT (0x88) disabled
# bounds: x1=56 y1=16 x2=361 y2=33
# text: "Enter the name to be applied to the revisions"
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=52 x2=127 y2=69
# text: "NameRevisions:"
# item 5: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
DITL_478.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=135 x2=332 y2=155
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=332 y2=124
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=159
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 9: TEXT (0x88) disabled
# bounds: x1=12 y1=164 x2=230 y2=184
# text: "Please Locate “Source Manager Doc”"
DITL_479_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=160 y1=88 x2=228 y2=108
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=72 y1=88 x2=136 y2=108
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=56 y1=13 x2=192 y2=30
# text: "Open user manual?"
# item 4: TEXT (0x88) disabled
# bounds: x1=56 y1=32 x2=232 y2=80
# text: "Balloon help is available for just about everything, but if you want more information, open the user manual."
DITL_480_Pick Sample Rate.txt
# 9 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=206 y1=124 x2=276 y2=144
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=130 y1=124 x2=194 y2=144
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=86 x2=61 y2=101
# text: "KAHL"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=96 y1=86 x2=273 y2=101
# text: "Think Project Manager"
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=68 x2=63 y2=81
# text: "Creator:"
# item 5: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
# item 6: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=277 y2=57
# text: "Enter the creator and name of the application to add to the list, or click “Choose App”."
# item 7: TEXT (0x08) enabled
# bounds: x1=92 y1=68 x2=179 y2=81
# text: "Application name:"
# item 8: BUTTON (0x04) enabled
# bounds: x1=22 y1=124 x2=118 y2=144
# text: "Choose App..."
DITL_481.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=135 x2=332 y2=155
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=332 y2=124
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=159
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 9: TEXT (0x88) disabled
# bounds: x1=12 y1=164 x2=230 y2=184
# text: "Please choose an application"
DITL_482_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=76 x2=268 y2=96
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=120 y1=76 x2=184 y2=96
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=28
# text: "Overwrite this orphan with the database file having the same name?"
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=60
# text: "Overwrite this orphan with the database file having the same name?"
DITL_483_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=110 x2=320 y2=130
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 0
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=324 y2=60
# text: "Couldn’t ^2 “^0”. SourceSafe had this to say about it:"
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=63 x2=324 y2=100
# text: "^1"
DITL_484.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=135 x2=332 y2=155
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=332 y2=124
# text: "Cancel"
# item 2: UNKNOWN (0x81) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 0001E866
# item 3: CUSTOM (0x00) enabled
# bounds: x1=235 y1=8 x2=337 y2=24
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=252 y1=32 x2=332 y2=52
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=252 y1=60 x2=332 y2=80
# text: "Desktop"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=12 y1=29 x2=230 y2=159
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=12 y1=6 x2=230 y2=25
# data: ""
# item 8: PICTURE (0xC0) disabled
# bounds: x1=251 y1=91 x2=333 y2=92
# PICT resource ID: 11
# item 9: TEXT (0x88) disabled
# bounds: x1=12 y1=164 x2=230 y2=184
# text: "Please Locate ToolServer"
DITL_485_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=180 y1=60 x2=264 y2=80
# text: "BBEdit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=8 y1=60 x2=72 y2=80
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=288 y2=44
# text: "Select the application to use to perform the compare."
# item 4: BUTTON (0x84) disabled
# bounds: x1=84 y1=60 x2=164 y2=80
# text: "MPW"
DITL_486_Pick Sample Rate.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=108 x2=354 y2=128
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=208 y1=108 x2=272 y2=128
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=74 x2=352 y2=89
# text: "TEXT"
# item 3: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=357 y2=45
# text: "Name the new project using a full project pathname (e.g. $/MyProj/Sources)"
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=52 x2=127 y2=69
# text: "New Project:"
# item 5: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
DITL_487_FD Status.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=84 x2=384 y2=104
# text: "BBEdit Merge"
# item 1: BUTTON (0x04) enabled
# bounds: x1=8 y1=84 x2=72 y2=104
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=384 y2=44
# text: "Merge is not required to check in “^0”."
# item 4: BUTTON (0x84) disabled
# bounds: x1=180 y1=84 x2=268 y2=104
# text: "MPW Merge"
# item 5: BUTTON (0x04) enabled
# bounds: x1=84 y1=84 x2=172 y2=104
# text: "Check In"
DITL_488.txt
# 7 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=16 y1=12 x2=276 y2=28
# text: "MainText"
# item 1: CUSTOM (0x00) enabled
# bounds: x1=16392 y1=56 x2=16580 y2=67
# data: ""
# item 2: ICON (0xA0) disabled
# bounds: x1=16392 y1=8 x2=16424 y2=40
# ICON resource ID: 1
# item 3: BUTTON (0x04) enabled
# bounds: x1=16592 y1=53 x2=16656 y2=73
# text: "Cancel#3037"
# item 4: TEXT (0x08) enabled
# bounds: x1=16436 y1=24 x2=16580 y2=50
# text: "SubText line 1\nline 2"
# item 5: TEXT (0x08) enabled
# bounds: x1=16392 y1=72 x2=16475 y2=85
# text: "SubText2"
# item 6: TEXT (0x08) enabled
# bounds: x1=16491 y1=72 x2=16526 y2=85
# text: "SubText3"
DITL_489_Pick Sample Rate.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=236 y1=80 x2=306 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=160 y1=80 x2=224 y2=100
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=80 y1=57 x2=121 y2=72
# text: "TEXT"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=80 y1=81 x2=121 y2=96
# text: "****"
# item 4: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=241 y2=41
# text: "Enter a Type and Creator."
# item 5: TEXT (0x88) disabled
# bounds: x1=36 y1=56 x2=74 y2=73
# text: "Type:"
# item 6: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
# item 7: TEXT (0x88) disabled
# bounds: x1=16 y1=80 x2=74 y2=97
# text: "Creator:"
DITL_490_FD Status.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=68 x2=320 y2=88
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 0
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=324 y2=60
# text: "Couldn’t ^2 “^0”. "
DITL_491_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=136 y1=88 x2=200 y2=108
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=52 y1=88 x2=116 y2=108
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=212 y2=44
# text: "Remove selected files from Project?"
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=48 x2=196 y2=80
# text: "(Note: you can use the option key to suppress this dialog)"
DITL_492_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=110 x2=320 y2=130
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 0
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=324 y2=60
# text: "Couldn’t ^2 “^0”. SourceServer had this to say about it:"
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=63 x2=324 y2=100
# text: "^1"
DITL_493_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=76 x2=268 y2=96
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=120 y1=76 x2=184 y2=96
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=28
# text: "Overwrite this orphan with the database file having the same name?"
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=60
# text: "Rename all mod read-only files in the entire current directory, and check out latest?"
DITL_494_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=208 y1=80 x2=272 y2=100
# text: "Cancel"
# item 1: BUTTON (0x04) enabled
# bounds: x1=44 y1=80 x2=190 y2=100
# text: "Remember This Dir..."
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=272 y2=28
# text: "CheckOut dir is unexpected."
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=28 x2=272 y2=68
# text: "If the current CheckOut directory is the correct one to start using for the current project, click “Remember This Dir” to proceed."
DITL_495_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=252 y1=104 x2=316 y2=124
# text: "Cancel"
# item 1: BUTTON (0x04) enabled
# bounds: x1=168 y1=104 x2=232 y2=124
# text: "Proceed"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=272 y2=28
# text: "Checkout dir is unknown."
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=36 x2=324 y2=88
# text: "The current project has no CheckOut dir defined for it, so SM has no way of being sure the current dir is the one you want to use. If it is, proceed. Use “Specify CheckOut Dirs” to define a CheckOut dir for this project."
DITL_496_FD Status.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=80 x2=268 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=120 y1=80 x2=184 y2=100
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=28
# text: "Overwrite existing prefs?"
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=28 x2=272 y2=68
# text: "The file “Source Manager Prefs” was created by a newer version of Source Manager. Click OK to overwrite or Cancel to preserve them."
DITL_497_FD Status.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=276 y1=208 x2=340 y2=228
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16548 y1=92 x2=16612 y2=112
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=344 y2=28
# text: "The file “UserStartupTS” may be missing. "
# item 4: TEXT (0x88) disabled
# bounds: x1=52 y1=84 x2=336 y2=124
# text: "In order for ToolServer to find “UserStartupTS”, it must be located either in the same folder as ToolServer or in your System prefs folder."
# item 5: TEXT (0x88) disabled
# bounds: x1=52 y1=132 x2=336 y2=188
# text: "If you’re sure it exists and is in the right place, but you have more than one ToolServer on your disk, quit ToolServer, hold the shift key down and choose “Launch ToolServer”, and use “Manual-Find” to locate the correct ToolServer to use."
# item 6: TEXT (0x88) disabled
# bounds: x1=52 y1=28 x2=336 y2=80
# text: "Source Manager has determined that the ToolServer file “UserStartupTS” did not properly initialize ToolServer. This is probably because it wasn’t found by ToolServer, although it could be because it’s not configured correctly."
# item 7: TEXT (0x88) disabled
# bounds: x1=52 y1=180 x2=308 y2=197
# text: "(SM will, of course, use that ToolServer from then on.)"
DITL_498_FD Status.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=288 y1=200 x2=352 y2=220
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16548 y1=92 x2=16612 y2=112
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=339 y2=24
# text: "The file “UserStartupTS” is misconfigured."
# item 4: TEXT (0x88) disabled
# bounds: x1=51 y1=48 x2=339 y2=88
# text: "The symbol “^0”, which should be defined in the file “UserStartupTS”, is not defined. Source Manager cannot communicate with SourceSafe until this is corrected."
# item 5: TEXT (0x88) disabled
# bounds: x1=52 y1=92 x2=339 y2=144
# text: "If you need instructions on how to properly setup “UserStartupTS”, please see the Source Manager manual chapter “Configuring SM for SourceSafe”, or look at the file “Sample UserStartupTS” which came with Source Manager."
# item 6: TEXT (0x88) disabled
# bounds: x1=52 y1=148 x2=339 y2=188
# text: "Once you have corrected the problem, quit ToolServer and then restart it. This will make it execute “UserStartupTS” and all will be well."
DITL_499_FD Status.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=288 y1=156 x2=352 y2=176
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16548 y1=92 x2=16612 y2=112
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=344 y2=44
# text: "The path “^0” is invalid."
# item 4: TEXT (0x88) disabled
# bounds: x1=51 y1=48 x2=339 y2=88
# text: "The most common reason for this alert is that the volume specified in the path is probably not mounted. Please quit ToolServer, mount the volume, and then re-launch ToolServer."
# item 5: TEXT (0x88) disabled
# bounds: x1=52 y1=92 x2=339 y2=144
# text: "If you need instructions on how to properly setup “UserStartupTS”, please see the Source Manager manual chapter “Configuring SM for SourceSafe”, or look at the file “Sample UserStartupTS” which came with Source Manager."
DITL_500_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=80 x2=268 y2=100
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=120 y1=80 x2=184 y2=100
# text: "Not Done"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=280 y2=28
# text: "Move selected files to the trash?"
DITL_501_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=52 x2=268 y2=72
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=120 y1=52 x2=184 y2=72
# text: "Cancel"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 2
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=280 y2=28
# text: "Delete project/dir entry?"
DITL_502_Pick Sample Rate.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=80 x2=278 y2=100
# text: "Remember"
# item 1: BUTTON (0x04) enabled
# bounds: x1=116 y1=80 x2=180 y2=100
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=284 y2=24
# text: "Remember this project/dir association? "
# item 3: TEXT (0x88) disabled
# bounds: x1=40 y1=32 x2=280 y2=49
# text: "^0"
# item 4: ICON (0xA0) disabled
# bounds: x1=12 y1=32 x2=44 y2=64
# ICON resource ID: 141
# item 5: TEXT (0x88) disabled
# bounds: x1=40 y1=49 x2=280 y2=66
# text: "^1"
DITL_503_Pick Sample Rate.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=80 x2=278 y2=100
# text: "Remember"
# item 1: BUTTON (0x04) enabled
# bounds: x1=116 y1=80 x2=180 y2=100
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=8 x2=284 y2=24
# text: "Remember this project/dir association? "
# item 3: TEXT (0x88) disabled
# bounds: x1=40 y1=32 x2=280 y2=49
# text: "^0"
# item 4: ICON (0xA0) disabled
# bounds: x1=12 y1=32 x2=44 y2=64
# ICON resource ID: 142
# item 5: TEXT (0x88) disabled
# bounds: x1=40 y1=49 x2=280 y2=66
# text: "^1"
DITL_504_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=80 x2=268 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16504 y1=80 x2=16568 y2=100
# text: "Not Done"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=60
# text: "Mount some projects first. Then you can define CheckOut dirs for them."
DITL_505_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=80 x2=268 y2=100
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16504 y1=80 x2=16568 y2=100
# text: "Not Done"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=64
# text: "Launch Toolserver first, so we’ll have some projects to define dirs for."
DITL_506_FD Status.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=88 y1=108 x2=184 y2=128
# text: "SourceServer"
# item 1: BUTTON (0x04) enabled
# bounds: x1=228 y1=108 x2=324 y2=128
# text: "SourceSafe"
# item 2: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=368 y2=56
# text: "Welcome, new user! Which host program will you be using for source control? I’ll setup the menu bar for whatever you choose."
# item 4: ICON (0xA0) disabled
# bounds: x1=116 y1=64 x2=148 y2=96
# ICON resource ID: 129
# item 5: ICON (0xA0) disabled
# bounds: x1=256 y1=64 x2=288 y2=96
# ICON resource ID: 130
DITL_507_FD Status.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=196 y1=80 x2=260 y2=100
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=200 y2=28
# text: "Not enough memory."
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=35 x2=268 y2=64
# text: "(There’s not enough memory to ^0 ^1)."
DITL_508_Pick Sample Rate.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=108 x2=354 y2=128
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=208 y1=108 x2=272 y2=128
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=20 y1=74 x2=352 y2=89
# text: "TEXT"
# item 3: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=357 y2=25
# text: "Name the new group"
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=52 x2=127 y2=69
# text: "New Group:"
# item 5: ICON (0xA0) disabled
# bounds: x1=16 y1=8 x2=48 y2=40
# ICON resource ID: 1
DITL_509_FD Status.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=80 x2=268 y2=100
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=60
# text: "Mount some projects first. Then you can specify groupings."
DITL_510_FD Status.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=80 x2=268 y2=100
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=276 y2=60
# text: "Launch ToolServer first. Then we’ll have some projects to group together."
DITL_511_FD Status.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=204 y1=88 x2=268 y2=108
# text: "OK"
# item 1: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 1
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=8 x2=272 y2=72
# text: "Define a group first (use the “Group” popup to do so). Then you can double-click this table to add projects to the group."
DITL_512.txt
# 6 entries
# item 0: PICTURE (0x40) enabled
# bounds: x1=-1 y1=-1 x2=320 y2=215
# PICT resource ID: 132
# item 1: TEXT (0x88) disabled
# bounds: x1=52 y1=86 x2=292 y2=176
# text: "@$CMyDLOGUserItemPane$Pane$128"
# item 2: TEXT (0x88) disabled
# bounds: x1=52 y1=18 x2=292 y2=40
# text: "@$CMyDLOGUserItemPane$Pane$128"
# item 3: TEXT (0x88) disabled
# bounds: x1=52 y1=60 x2=292 y2=82
# text: "@$CMyDLOGUserItemPane$Pane$128"
# item 4: ICON (0xA0) disabled
# bounds: x1=8 y1=8 x2=40 y2=40
# ICON resource ID: 140
# item 5: BUTTON (0x04) enabled
# bounds: x1=236 y1=180 x2=300 y2=200
# text: "OK#100"
DITL_513.txt
# 2 entries
# item 0: PICTURE (0xC0) disabled
# bounds: x1=-1 y1=-1 x2=320 y2=215
# PICT resource ID: 132
# item 1: TEXT (0x88) disabled
# bounds: x1=102 y1=90 x2=219 y2=106
# text: " Source Manager"
DITL_1000_AboutTCFonts.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=416 y1=268 x2=474 y2=288
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=4 y1=3 x2=476 y2=292
# data: ""
DITL_1024.txt
# 0 entries
DITL_1030.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=211 y1=296 x2=273 y2=316
# text: "OK#100"
# item 1: TEXT (0x08) enabled
# bounds: x1=11 y1=49 x2=274 y2=120
# text: "@$CMyScrollPane$ScPn$1030"
# item 2: BUTTON (0x04) enabled
# bounds: x1=12 y1=296 x2=130 y2=316
# text: "Remove Project#4002"
# item 3: BUTTON (0x04) enabled
# bounds: x1=12 y1=268 x2=130 y2=288
# text: "Add Project#4000"
# item 4: TEXT (0x88) disabled
# bounds: x1=11 y1=33 x2=140 y2=49
# text: "Available projects:"
# item 5: TEXT (0x08) enabled
# bounds: x1=11 y1=141 x2=274 y2=252
# text: "@$CMyScrollPane$ScPn$1031"
# item 6: TEXT (0x88) disabled
# bounds: x1=11 y1=125 x2=136 y2=141
# text: "Projects in group:"
# item 7: BUTTON (0x04) enabled
# bounds: x1=139 y1=296 x2=199 y2=316
# text: "Cancel#101"
DITL_1031.txt
# 48 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=380 y1=292 x2=438 y2=312
# text: "OK#100"
# item 1: BUTTON (0x04) enabled
# bounds: x1=304 y1=293 x2=362 y2=313
# text: "Cancel#101"
# item 2: TEXT (0x88) disabled
# bounds: x1=44 y1=292 x2=189 y2=309
# text: "NOTE: Balloon help is available"
# item 3: TEXT (0x88) disabled
# bounds: x1=8 y1=210 x2=287 y2=282
# text: "@$CPane$Pane$132"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=158 y1=216 x2=279 y2=232
# text: "Read Only#3009"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=158 y1=232 x2=279 y2=248
# text: "Orphans#3010"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=158 y1=248 x2=279 y2=264
# text: "Exclude app’s#3011"
# item 7: TEXT (0x88) disabled
# bounds: x1=8 y1=142 x2=287 y2=201
# text: "@$CPane$Pane$128"
# item 8: TEXT (0x88) disabled
# bounds: x1=296 y1=61 x2=480 y2=124
# text: "@$CPane$Pane$129"
# item 9: TEXT (0x88) disabled
# bounds: x1=296 y1=132 x2=480 y2=217
# text: "@$CPane$Pane$130"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=307 y1=156 x2=423 y2=172
# text: "Dialog answer#3015"
# item 11: TEXT (0x88) disabled
# bounds: x1=296 y1=225 x2=480 y2=284
# text: "@$CPane$Pane$130"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=316 y1=250 x2=442 y2=266
# text: "Only Listed Files#3013"
# item 13: TEXT (0x08) enabled
# bounds: x1=320 y1=172 x2=416 y2=198
# text: "@RadioGroupPane"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=328 y1=176 x2=364 y2=192
# text: "-n#3016"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=368 y1=176 x2=404 y2=192
# text: "-y#3017"
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=14 y1=232 x2=134 y2=248
# text: "Modifiable#3007"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=14 y1=248 x2=134 y2=264
# text: "Branch#3008"
# item 18: TEXT (0x88) disabled
# bounds: x1=106 y1=204 x2=182 y2=222
# text: "List these files"
# item 19: TEXT (0x88) disabled
# bounds: x1=100 y1=134 x2=175 y2=154
# text: "Miscellaneous"
# item 20: TEXT (0x88) disabled
# bounds: x1=344 y1=55 x2=392 y2=75
# text: "Date sort"
# item 21: TEXT (0x88) disabled
# bounds: x1=336 y1=126 x2=404 y2=146
# text: "CheckIn cmds"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=308 y1=266 x2=442 y2=282
# text: "Mounted Projects#3046"
# item 23: TEXT (0x08) enabled
# bounds: x1=304 y1=80 x2=420 y2=120
# text: "@RadioGroupPane"
# item 24: RADIO_BUTTON (0x06) enabled
# bounds: x1=308 y1=84 x2=406 y2=101
# text: "Ascending#3020"
# item 25: RADIO_BUTTON (0x06) enabled
# bounds: x1=307 y1=100 x2=405 y2=116
# text: "Descending#3021"
# item 26: CHECKBOX (0x05) enabled
# bounds: x1=158 y1=166 x2=279 y2=182
# text: "Full proj paths#3028"
# item 27: CHECKBOX (0x05) enabled
# bounds: x1=19 y1=166 x2=148 y2=182
# text: "Remember sort#3027"
# item 28: CHECKBOX (0x05) enabled
# bounds: x1=19 y1=150 x2=148 y2=166
# text: "Mark unchanged#3022"
# item 29: CHECKBOX (0x05) enabled
# bounds: x1=307 y1=69 x2=444 y2=85
# text: "Float unchanged#3019"
# item 30: CHECKBOX (0x05) enabled
# bounds: x1=307 y1=140 x2=343 y2=156
# text: "-p#3014"
# item 31: CHECKBOX (0x05) enabled
# bounds: x1=308 y1=234 x2=438 y2=250
# text: "Files#3012"
# item 32: CHECKBOX (0x05) enabled
# bounds: x1=14 y1=216 x2=134 y2=232
# text: "Mod Read Only#3006"
# item 33: CHECKBOX (0x05) enabled
# bounds: x1=307 y1=198 x2=423 y2=214
# text: "Infer Project#3018"
# item 34: TEXT (0x88) disabled
# bounds: x1=8 y1=70 x2=195 y2=133
# text: "@$CPane$Pane$128"
# item 35: CHECKBOX (0x05) enabled
# bounds: x1=64 y1=266 x2=190 y2=282
# text: "Filter Orphans#3040"
# item 36: CHECKBOX (0x05) enabled
# bounds: x1=158 y1=150 x2=279 y2=166
# text: "Full file paths#3041"
# item 37: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=78 x2=186 y2=94
# text: "Do Nested Folders#3042"
# item 38: TEXT (0x88) disabled
# bounds: x1=8 y1=13 x2=195 y2=56
# text: "@$CPane$Pane$128"
# item 39: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=94 x2=186 y2=110
# text: "Ask Before Processing#3044"
# item 40: TEXT (0x88) disabled
# bounds: x1=76 y1=62 x2=115 y2=82
# text: "Folders"
# item 41: TEXT (0x88) disabled
# bounds: x1=60 y1=6 x2=111 y2=26
# text: "Warnings"
# item 42: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=38 x2=186 y2=54
# text: "Multi Comment Edit#3043"
# item 43: CHECKBOX (0x05) enabled
# bounds: x1=19 y1=21 x2=186 y2=37
# text: "Empty Comment#3045"
# item 44: TEXT (0x88) disabled
# bounds: x1=322 y1=219 x2=414 y2=239
# text: "Refresh on resume"
# item 45: CHECKBOX (0x05) enabled
# bounds: x1=16 y1=110 x2=186 y2=126
# text: "Exclude parenthesized#3048"
# item 46: CHECKBOX (0x05) enabled
# bounds: x1=158 y1=182 x2=279 y2=198
# text: "Set Default Dir#3049"
# item 47: CHECKBOX (0x05) enabled
# bounds: x1=19 y1=182 x2=148 y2=198
# text: "Mount Projects#3054"
DITL_1032.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=84 y1=264 x2=142 y2=284
# text: "Done#100"
# item 1: BUTTON (0x04) enabled
# bounds: x1=16476 y1=261 x2=16534 y2=281
# text: "Cancel#101"
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=32 x2=224 y2=138
# text: "@$CPane$Pane$128"
# item 3: TEXT (0x88) disabled
# bounds: x1=11 y1=146 x2=223 y2=248
# text: "@$CPane$Pane$128"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=20 y1=52 x2=96 y2=76
# text: "All#3000"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=20 y1=76 x2=96 y2=100
# text: "Only:#3001"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=20 y1=100 x2=96 y2=124
# text: "Exclude:#3002"
# item 7: TEXT (0x08) enabled
# bounds: x1=100 y1=80 x2=194 y2=100
# text: "@$CStdPopupPane$StdP$450"
# item 8: TEXT (0x08) enabled
# bounds: x1=100 y1=104 x2=194 y2=124
# text: "@$CStdPopupPane$StdP$451"
# item 9: TEXT (0x88) disabled
# bounds: x1=64 y1=25 x2=143 y2=43
# text: "Types/Creators"
# item 10: TEXT (0x88) disabled
# bounds: x1=57 y1=139 x2=160 y2=157
# text: "Filename extensions"
# item 11: TEXT (0x88) disabled
# bounds: x1=16 y1=8 x2=161 y2=25
# text: "NOTE: Balloon help is available"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=20 y1=167 x2=96 y2=191
# text: "All#3003"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=20 y1=191 x2=96 y2=215
# text: "Only:#3004"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=20 y1=215 x2=96 y2=239
# text: "Exclude:#3005"
# item 15: TEXT (0x08) enabled
# bounds: x1=100 y1=195 x2=194 y2=215
# text: "@$CStdPopupPane$StdP$452"
# item 16: TEXT (0x08) enabled
# bounds: x1=100 y1=219 x2=194 y2=239
# text: "@$CStdPopupPane$StdP$453"
DITL_1033.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=264 y1=264 x2=322 y2=284
# text: "OK#100"
# item 1: BUTTON (0x04) enabled
# bounds: x1=12 y1=264 x2=150 y2=284
# text: "No More Comments#101"
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=32 x2=224 y2=54
# text: "@$CPane$Pane$128"
# item 3: TEXT (0x88) disabled
# bounds: x1=64 y1=25 x2=91 y2=43
# text: "Task"
# item 4: TEXT (0x88) disabled
# bounds: x1=11 y1=146 x2=223 y2=248
# text: "@$CPane$Pane$128"
# item 5: TEXT (0x88) disabled
# bounds: x1=57 y1=139 x2=108 y2=157
# text: "Comment"
# item 6: TEXT (0x88) disabled
# bounds: x1=16 y1=8 x2=161 y2=25
# text: "NOTE: Balloon help is available"
# item 7: BUTTON (0x04) enabled
# bounds: x1=156 y1=264 x2=258 y2=284
# text: "No Comment#101"
DITL_1034.txt
# 9 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=224 y1=92 x2=286 y2=112
# text: "Recent#100"
# item 1: BUTTON (0x04) enabled
# bounds: x1=148 y1=92 x2=210 y2=112
# text: "All#101"
# item 2: TEXT (0x08) enabled
# bounds: x1=100 y1=56 x2=146 y2=76
# text: "@$CStdPopupPane$StdP$458"
# item 3: TEXT (0x08) enabled
# bounds: x1=164 y1=56 x2=258 y2=76
# text: "@$CStdPopupPane$StdP$459"
# item 4: TEXT (0x88) disabled
# bounds: x1=64 y1=36 x2=260 y2=52
# text: "“Recent” means files modified in the last:"